from abc import ABC, abstractmethod
from collections.abc import Iterable
from copy import copy
from functools import partial
from math import sqrt, pi, sin, cos, isclose
from numbers import Real
import warnings
import operator
from typing import Sequence
import numpy as np
from scipy.spatial import ConvexHull, Delaunay
import openmc
from openmc.checkvalue import (check_greater_than, check_value, check_less_than,
check_iterable_type, check_length, check_type)
class CompositeSurface(ABC):
"""Multiple primitive surfaces combined into a composite surface"""
def translate(self, vector, inplace=False):
surf = self if inplace else copy(self)
for name in self._surface_names:
s = getattr(surf, name)
setattr(surf, name, s.translate(vector, inplace))
return surf
def rotate(self, rotation, pivot=(0., 0., 0.), order='xyz', inplace=False):
surf = copy(self)
for name in self._surface_names:
s = getattr(surf, name)
setattr(surf, name, s.rotate(rotation, pivot, order, inplace))
return surf
@property
def boundary_type(self):
return getattr(self, self._surface_names[0]).boundary_type
@boundary_type.setter
def boundary_type(self, boundary_type):
# Set boundary type on underlying surfaces, but not for ambiguity plane
# on one-sided cones
for name in self._surface_names:
if name != 'plane':
getattr(self, name).boundary_type = boundary_type
def __repr__(self):
return "<{} at 0x{:x}>".format(type(self).__name__, id(self))
@property
@abstractmethod
def _surface_names(self):
"""Iterable of attribute names corresponding to underlying surfaces."""
@abstractmethod
def __neg__(self) -> openmc.Region:
"""Return the negative half-space of the composite surface."""
def __pos__(self) -> openmc.Region:
"""Return the positive half-space of the composite surface."""
return ~(-self)
[docs]class CylinderSector(CompositeSurface):
"""Infinite cylindrical sector composite surface.
A cylinder sector is composed of two cylindrical and two planar surfaces.
The cylindrical surfaces are concentric, and the planar surfaces intersect
the central axis of the cylindrical surfaces.
This class acts as a proper surface, meaning that unary `+` and `-`
operators applied to it will produce a half-space. The negative
side is defined to be the region inside of the cylinder sector.
.. versionadded:: 0.13.1
Parameters
----------
r1 : float
Inner radius of sector. Must be less than r2.
r2 : float
Outer radius of sector. Must be greater than r1.
theta1 : float
Clockwise-most bound of sector in degrees. Assumed to be in the
counterclockwise direction with respect to the first basis axis
(+y, +z, or +x). Must be less than :attr:`theta2`.
theta2 : float
Counterclockwise-most bound of sector in degrees. Assumed to be in the
counterclockwise direction with respect to the first basis axis
(+y, +z, or +x). Must be greater than :attr:`theta1`.
center : iterable of float
Coordinate for central axes of cylinders in the (y, z), (z, x), or (x, y)
basis. Defaults to (0,0).
axis : {'x', 'y', 'z'}
Central axis of the cylinders defining the inner and outer surfaces of
the sector. Defaults to 'z'.
**kwargs : dict
Keyword arguments passed to the :class:`Cylinder` and
:class:`Plane` constructors.
Attributes
----------
outer_cyl : openmc.ZCylinder, openmc.YCylinder, or openmc.XCylinder
Outer cylinder surface.
inner_cyl : openmc.ZCylinder, openmc.YCylinder, or openmc.XCylinder
Inner cylinder surface.
plane1 : openmc.Plane
Plane at angle :math:`\\theta_1` relative to the first basis axis.
plane2 : openmc.Plane
Plane at angle :math:`\\theta_2` relative to the first basis axis.
"""
_surface_names = ('outer_cyl', 'inner_cyl', 'plane1', 'plane2')
def __init__(self,
r1,
r2,
theta1,
theta2,
center=(0.,0.),
axis='z',
**kwargs):
if r2 <= r1:
raise ValueError('r2 must be greater than r1.')
if theta2 <= theta1:
raise ValueError('theta2 must be greater than theta1.')
phi1 = pi / 180 * theta1
phi2 = pi / 180 * theta2
# Coords for axis-perpendicular planes
p1 = np.array([0., 0., 1.])
p2_plane1 = np.array([r1 * cos(phi1), r1 * sin(phi1), 0.])
p3_plane1 = np.array([r2 * cos(phi1), r2 * sin(phi1), 0.])
p2_plane2 = np.array([r1 * cos(phi2), r1 * sin(phi2), 0.])
p3_plane2 = np.array([r2 * cos(phi2), r2 * sin(phi2), 0.])
points = [p1, p2_plane1, p3_plane1, p2_plane2, p3_plane2]
if axis == 'z':
coord_map = [0, 1, 2]
self.inner_cyl = openmc.ZCylinder(*center, r1, **kwargs)
self.outer_cyl = openmc.ZCylinder(*center, r2, **kwargs)
elif axis == 'y':
coord_map = [1, 2, 0]
self.inner_cyl = openmc.YCylinder(*center, r1, **kwargs)
self.outer_cyl = openmc.YCylinder(*center, r2, **kwargs)
elif axis == 'x':
coord_map = [2, 0, 1]
self.inner_cyl = openmc.XCylinder(*center, r1, **kwargs)
self.outer_cyl = openmc.XCylinder(*center, r2, **kwargs)
for p in points:
p[:] = p[coord_map]
self.plane1 = openmc.Plane.from_points(p1, p2_plane1, p3_plane1,
**kwargs)
self.plane2 = openmc.Plane.from_points(p1, p2_plane2, p3_plane2,
**kwargs)
[docs] @classmethod
def from_theta_alpha(cls,
r1,
r2,
theta,
alpha,
center = (0.,0.),
axis='z',
**kwargs):
r"""Alternate constructor for :class:`CylinderSector`. Returns a
:class:`CylinderSector` object based on a central angle :math:`\theta`
and an angular offset :math:`\alpha`. Note that
:math:`\theta_1 = \alpha` and :math:`\theta_2 = \alpha + \theta`.
Parameters
----------
r1 : float
Inner radius of sector. Must be less than r2.
r2 : float
Outer radius of sector. Must be greater than r1.
theta : float
Central angle, :math:`\theta`, of the sector in degrees. Must be
greater that 0 and less than 360.
alpha : float
Angular offset, :math:`\alpha`, of sector in degrees.
The offset is in the counter-clockwise direction
with respect to the first basis axis (+y, +z, or +x). Note that
negative values translate to an offset in the clockwise direction.
center : iterable of float
Coordinate for central axes of cylinders in the (y, z), (z, x), or (x, y)
basis. Defaults to (0,0).
axis : {'x', 'y', 'z'}
Central axis of the cylinders defining the inner and outer surfaces
of the sector. Defaults to 'z'.
**kwargs : dict
Keyword arguments passed to the :class:`Cylinder` and
:class:`Plane` constructors.
Returns
-------
CylinderSector
CylinderSector with the given central angle at the given
offset.
"""
if theta >= 360. or theta <= 0:
raise ValueError('theta must be less than 360 and greater than 0.')
theta1 = alpha
theta2 = alpha + theta
return cls(r1, r2, theta1, theta2, center=center, axis=axis, **kwargs)
def __neg__(self):
return -self.outer_cyl & +self.inner_cyl & -self.plane1 & +self.plane2
def __pos__(self):
return +self.outer_cyl | -self.inner_cyl | +self.plane1 | -self.plane2
[docs]class IsogonalOctagon(CompositeSurface):
r"""Infinite isogonal octagon composite surface
An isogonal octagon is composed of eight planar surfaces. The prism is
parallel to the x, y, or z axis. The remaining two axes (y and z, z and x,
or x and y) serve as a basis for constructing the surfaces. Two surfaces
are parallel to the first basis axis, two surfaces are parallel
to the second basis axis, and the remaining four surfaces intersect both
basis axes at 45 degree angles.
This class acts as a proper surface, meaning that unary `+` and `-`
operators applied to it will produce a half-space. The negative side is
defined to be the region inside of the octogonal prism.
.. versionadded:: 0.13.1
Parameters
----------
center : iterable of float
Coordinate for the central axis of the octagon in the
(y, z), (z, x), or (x, y) basis.
r1 : float
Half-width of octagon across its basis axis-parallel sides in units
of cm. Must be less than :math:`r_2\sqrt{2}`.
r2 : float
Half-width of octagon across its basis axis intersecting sides in
units of cm. Must be less than than :math:`r_1\sqrt{2}`.
axis : {'x', 'y', 'z'}
Central axis of octagon. Defaults to 'z'
**kwargs
Keyword arguments passed to underlying plane classes
Attributes
----------
top : openmc.ZPlane, openmc.XPlane, or openmc.YPlane
Top planar surface of octagon
bottom : openmc.ZPlane, openmc.XPlane, or openmc.YPlane
Bottom planar surface of octagon
right : openmc.YPlane, openmc.ZPlane, or openmc.XPlane
Right planar surface of octagon
left : openmc.YPlane, openmc.ZPlane, or openmc.XPlane
Left planar surface of octagon
upper_right : openmc.Plane
Upper right planar surface of octagon
lower_right : openmc.Plane
Lower right planar surface of octagon
lower_left : openmc.Plane
Lower left planar surface of octagon
upper_left : openmc.Plane
Upper left planar surface of octagon
"""
_surface_names = ('top', 'bottom',
'upper_right', 'lower_left',
'right', 'left',
'lower_right', 'upper_left')
def __init__(self, center, r1, r2, axis='z', **kwargs):
c1, c2 = center
# Coords for axis-perpendicular planes
ctop = c1 + r1
cbottom = c1 - r1
cright = c2 + r1
cleft = c2 - r1
# Side lengths
if r2 > r1 * sqrt(2):
raise ValueError('r2 is greater than sqrt(2) * r1. Octagon' +
' may be erroneous.')
if r1 > r2 * sqrt(2):
raise ValueError('r1 is greater than sqrt(2) * r2. Octagon' +
' may be erroneous.')
L_basis_ax = (r2 * sqrt(2) - r1)
# Coords for quadrant planes
p1_ur = np.array([L_basis_ax, r1, 0.])
p2_ur = np.array([r1, L_basis_ax, 0.])
p3_ur = np.array([r1, L_basis_ax, 1.])
p1_lr = np.array([r1, -L_basis_ax, 0.])
p2_lr = np.array([L_basis_ax, -r1, 0.])
p3_lr = np.array([L_basis_ax, -r1, 1.])
points = [p1_ur, p2_ur, p3_ur, p1_lr, p2_lr, p3_lr]
# Orientation specific variables
if axis == 'z':
coord_map = [0, 1, 2]
self.top = openmc.YPlane(ctop, **kwargs)
self.bottom = openmc.YPlane(cbottom, **kwargs)
self.right = openmc.XPlane(cright, **kwargs)
self.left = openmc.XPlane(cleft, **kwargs)
elif axis == 'y':
coord_map = [1, 2, 0]
self.top = openmc.XPlane(ctop, **kwargs)
self.bottom = openmc.XPlane(cbottom, **kwargs)
self.right = openmc.ZPlane(cright, **kwargs)
self.left = openmc.ZPlane(cleft, **kwargs)
elif axis == 'x':
coord_map = [2, 0, 1]
self.top = openmc.ZPlane(ctop, **kwargs)
self.bottom = openmc.ZPlane(cbottom, **kwargs)
self.right = openmc.YPlane(cright, **kwargs)
self.left = openmc.YPlane(cleft, **kwargs)
# Put our coordinates in (x,y,z) order
for p in points:
p[:] = p[coord_map]
self.upper_right = openmc.Plane.from_points(p1_ur, p2_ur, p3_ur,
**kwargs)
self.lower_right = openmc.Plane.from_points(p1_lr, p2_lr, p3_lr,
**kwargs)
self.lower_left = openmc.Plane.from_points(-p1_ur, -p2_ur, -p3_ur,
**kwargs)
self.upper_left = openmc.Plane.from_points(-p1_lr, -p2_lr, -p3_lr,
**kwargs)
def __neg__(self):
return -self.top & +self.bottom & -self.right & +self.left & \
+self.upper_right & +self.lower_right & -self.lower_left & \
-self.upper_left
def __pos__(self):
return +self.top | -self.bottom | +self.right | -self.left | \
-self.upper_right | -self.lower_right | +self.lower_left | \
+self.upper_left
[docs]class RightCircularCylinder(CompositeSurface):
"""Right circular cylinder composite surface
A right circular cylinder is composed of a cylinder and two planar surface
perpendicular to the axis of the cylinder. This class acts as a proper
surface, meaning that unary `+` and `-` operators applied to it will produce
a half-space. The negative side is defined to be the region inside of the
right circular cylinder.
.. versionadded:: 0.12
Parameters
----------
center_base : iterable of float
Cartesian coordinate of the center of the base of the cylinder
height : float
Height of the cylinder
radius : float
Radius of the cylinder
axis : {'x', 'y', 'z'}
Axis of the cylinder
upper_fillet_radius : float
Upper edge fillet radius in [cm].
lower_fillet_radius : float
Lower edge fillet radius in [cm].
**kwargs
Keyword arguments passed to underlying cylinder and plane classes
Attributes
----------
cyl : openmc.Cylinder
Underlying cylinder surface
bottom : openmc.Plane
Bottom planar surface of the cylinder
top : openmc.Plane
Top planar surface of the cylinder
upper_fillet_torus : openmc.Torus
Surface that creates the filleted edge for the upper end of the
cylinder. Only present if :attr:`upper_fillet_radius` is set.
upper_fillet_cylinder : openmc.Cylinder
Surface that bounds :attr:`upper_fillet_torus` radially. Only present
if :attr:`upper_fillet_radius` is set.
upper_fillet_plane : openmc.Plane
Surface that bounds :attr:`upper_fillet_torus` axially. Only present if
:attr:`upper_fillet_radius` is set.
lower_fillet_torus : openmc.Torus
Surface that creates the filleted edge for the lower end of the
cylinder. Only present if :attr:`lower_fillet_radius` is set.
lower_fillet_cylinder : openmc.Cylinder
Surface that bounds :attr:`lower_fillet_torus` radially. Only present
if :attr:`lower_fillet_radius` is set.
lower_fillet_plane : openmc.Plane
Surface that bounds :attr:`lower_fillet_torus` axially. Only present if
:attr:`lower_fillet_radius` is set.
"""
_surface_names = ('cyl', 'bottom', 'top')
def __init__(self, center_base, height, radius, axis='z',
upper_fillet_radius=0., lower_fillet_radius=0., **kwargs):
cx, cy, cz = center_base
check_greater_than('cylinder height', height, 0.0)
check_greater_than('cylinder radius', radius, 0.0)
check_value('cylinder axis', axis, ('x', 'y', 'z'))
check_type('upper_fillet_radius', upper_fillet_radius, float)
check_less_than('upper_fillet_radius', upper_fillet_radius,
radius, equality=True)
check_type('lower_fillet_radius', lower_fillet_radius, float)
check_less_than('lower_fillet_radius', lower_fillet_radius,
radius, equality=True)
if axis == 'x':
self.cyl = openmc.XCylinder(y0=cy, z0=cz, r=radius, **kwargs)
self.bottom = openmc.XPlane(x0=cx, **kwargs)
self.top = openmc.XPlane(x0=cx + height, **kwargs)
x1, x2 = 'y', 'z'
axcoord, axcoord1, axcoord2 = 0, 1, 2
elif axis == 'y':
self.cyl = openmc.YCylinder(x0=cx, z0=cz, r=radius, **kwargs)
self.bottom = openmc.YPlane(y0=cy, **kwargs)
self.top = openmc.YPlane(y0=cy + height, **kwargs)
x1, x2 = 'x', 'z'
axcoord, axcoord1, axcoord2 = 1, 0, 2
elif axis == 'z':
self.cyl = openmc.ZCylinder(x0=cx, y0=cy, r=radius, **kwargs)
self.bottom = openmc.ZPlane(z0=cz, **kwargs)
self.top = openmc.ZPlane(z0=cz + height, **kwargs)
x1, x2 = 'x', 'y'
axcoord, axcoord1, axcoord2 = 2, 0, 1
def _create_fillet_objects(axis_args, height, center_base, radius, fillet_radius, pos='upper'):
axis, x1, x2, axcoord, axcoord1, axcoord2 = axis_args
fillet_ext = height / 2 - fillet_radius
sign = 1
if pos == 'lower':
sign = -1
coord = center_base[axcoord] + (height / 2) + sign * fillet_ext
# cylinder
cyl_name = f'{pos}_min'
cylinder_args = {
x1 + '0': center_base[axcoord1],
x2 + '0': center_base[axcoord2],
'r': radius - fillet_radius
}
cls = getattr(openmc, f'{axis.upper()}Cylinder')
cyl = cls(name=f'{cyl_name} {axis}', **cylinder_args)
#torus
tor_name = f'{axis} {pos}'
tor_args = {
'a': radius - fillet_radius,
'b': fillet_radius,
'c': fillet_radius,
x1 + '0': center_base[axcoord1],
x2 + '0': center_base[axcoord2],
axis + '0': coord
}
cls = getattr(openmc, f'{axis.upper()}Torus')
torus = cls(name=tor_name, **tor_args)
# plane
p_name = f'{pos} ext'
p_args = {axis + '0': coord}
cls = getattr(openmc, f'{axis.upper()}Plane')
plane = cls(name=p_name, **p_args)
return cyl, torus, plane
if upper_fillet_radius > 0. or lower_fillet_radius > 0.:
if 'boundary_type' in kwargs:
if kwargs['boundary_type'] == 'periodic':
raise ValueError('Periodic boundary conditions not permitted when '
'rounded corners are used.')
axis_args = (axis, x1, x2, axcoord, axcoord1, axcoord2)
if upper_fillet_radius > 0.:
cylinder, torus, plane = _create_fillet_objects(
axis_args, height, center_base, radius, upper_fillet_radius)
self.upper_fillet_cylinder = cylinder
self.upper_fillet_torus = torus
self.upper_fillet_plane = plane
self._surface_names += ('upper_fillet_cylinder',
'upper_fillet_torus',
'upper_fillet_plane')
if lower_fillet_radius > 0.:
cylinder, torus, plane = _create_fillet_objects(
axis_args, height, center_base, radius, lower_fillet_radius,
pos='lower'
)
self.lower_fillet_cylinder = cylinder
self.lower_fillet_torus = torus
self.lower_fillet_plane = plane
self._surface_names += ('lower_fillet_cylinder',
'lower_fillet_torus',
'lower_fillet_plane')
def _get_fillet(self):
upper_fillet = self._get_upper_fillet()
lower_fillet = self._get_lower_fillet()
has_upper_fillet = upper_fillet is not None
has_lower_fillet = lower_fillet is not None
if has_lower_fillet and has_upper_fillet:
fillet = lower_fillet | upper_fillet
elif has_upper_fillet and not has_lower_fillet:
fillet = upper_fillet
elif not has_upper_fillet and has_lower_fillet:
fillet = lower_fillet
else:
fillet = None
return fillet
def _get_upper_fillet(self):
has_upper_fillet = hasattr(self, 'upper_fillet_plane')
if has_upper_fillet:
upper_fillet = +self.upper_fillet_cylinder & +self.upper_fillet_torus & +self.upper_fillet_plane
else:
upper_fillet = None
return upper_fillet
def _get_lower_fillet(self):
has_lower_fillet = hasattr(self, 'lower_fillet_plane')
if has_lower_fillet:
lower_fillet = +self.lower_fillet_cylinder & +self.lower_fillet_torus & -self.lower_fillet_plane
else:
lower_fillet = None
return lower_fillet
def __neg__(self):
prism = -self.cyl & +self.bottom & -self.top
fillet = self._get_fillet()
if fillet is not None:
prism = prism & ~fillet
return prism
def __pos__(self):
prism = +self.cyl | -self.bottom | +self.top
fillet = self._get_fillet()
if fillet is not None:
prism = prism | fillet
return prism
[docs]class RectangularParallelepiped(CompositeSurface):
"""Rectangular parallelpiped composite surface
A rectangular parallelpiped is composed of six planar surfaces. This class
acts as a proper surface, meaning that unary `+` and `-` operators applied
to it will produce a half-space. The negative side is defined to be the
region inside of the rectangular parallelpiped.
.. versionadded:: 0.12
Parameters
----------
xmin, xmax : float
Minimum and maximum x coordinates of the parallelepiped
ymin, ymax : float
Minimum and maximum y coordinates of the parallelepiped
zmin, zmax : float
Minimum and maximum z coordinates of the parallelepiped
**kwargs
Keyword arguments passed to underlying plane classes
Attributes
----------
xmin, xmax : openmc.XPlane
Sides of the parallelepiped
ymin, ymax : openmc.YPlane
Sides of the parallelepiped
zmin, zmax : openmc.ZPlane
Sides of the parallelepiped
"""
_surface_names = ('xmin', 'xmax', 'ymin', 'ymax', 'zmin', 'zmax')
def __init__(self, xmin, xmax, ymin, ymax, zmin, zmax, **kwargs):
if xmin >= xmax:
raise ValueError('xmin must be less than xmax')
if ymin >= ymax:
raise ValueError('ymin must be less than ymax')
if zmin >= zmax:
raise ValueError('zmin must be less than zmax')
self.xmin = openmc.XPlane(x0=xmin, **kwargs)
self.xmax = openmc.XPlane(x0=xmax, **kwargs)
self.ymin = openmc.YPlane(y0=ymin, **kwargs)
self.ymax = openmc.YPlane(y0=ymax, **kwargs)
self.zmin = openmc.ZPlane(z0=zmin, **kwargs)
self.zmax = openmc.ZPlane(z0=zmax, **kwargs)
def __neg__(self):
return -self.xmax & +self.xmin & -self.ymax & +self.ymin & -self.zmax & +self.zmin
def __pos__(self):
return +self.xmax | -self.xmin | +self.ymax | -self.ymin | +self.zmax | -self.zmin
[docs]class XConeOneSided(CompositeSurface):
"""One-sided cone parallel the x-axis
A one-sided cone is composed of a normal cone surface and a "disambiguation"
surface that eliminates the ambiguity as to which region of space is
included. This class acts as a proper surface, meaning that unary `+` and
`-` operators applied to it will produce a half-space. The negative side is
defined to be the region inside of the cone.
.. versionadded:: 0.12
Parameters
----------
x0 : float, optional
x-coordinate of the apex. Defaults to 0.
y0 : float, optional
y-coordinate of the apex. Defaults to 0.
z0 : float, optional
z-coordinate of the apex. Defaults to 0.
r2 : float, optional
Parameter related to the aperture [:math:`\\rm cm^2`].
It can be interpreted as the increase in the radius squared per cm along
the cone's axis of revolution.
up : bool
Whether to select the side of the cone that extends to infinity in the
positive direction of the coordinate axis (the positive half-space of
the ambiguity plane)
**kwargs
Keyword arguments passed to underlying plane classes
Attributes
----------
cone : openmc.XCone
Regular two-sided cone
plane : openmc.XPlane
Disambiguation surface
up : bool
Whether to select the side of the cone that extends to infinity in the
positive direction of the coordinate axis (the positive half-space of
the ambiguity plane)
"""
_surface_names = ('cone', 'plane')
def __init__(self, x0=0., y0=0., z0=0., r2=1., up=True, **kwargs):
check_greater_than('cone R^2', r2, 0.0)
self.cone = openmc.XCone(x0, y0, z0, r2, **kwargs)
self.plane = openmc.XPlane(x0)
self.up = up
def __neg__(self):
return -self.cone & (+self.plane if self.up else -self.plane)
def __pos__(self):
if self.up:
return (+self.cone & +self.plane) | -self.plane
else:
return (+self.cone & -self.plane) | +self.plane
[docs]class YConeOneSided(CompositeSurface):
"""One-sided cone parallel the y-axis
A one-sided cone is composed of a normal cone surface and a "disambiguation"
surface that eliminates the ambiguity as to which region of space is
included. This class acts as a proper surface, meaning that unary `+` and
`-` operators applied to it will produce a half-space. The negative side is
defined to be the region inside of the cone.
.. versionadded:: 0.12
Parameters
----------
x0 : float, optional
x-coordinate of the apex. Defaults to 0.
y0 : float, optional
y-coordinate of the apex. Defaults to 0.
z0 : float, optional
z-coordinate of the apex. Defaults to 0.
r2 : float, optional
Parameter related to the aperture [:math:`\\rm cm^2`].
It can be interpreted as the increase in the radius squared per cm along
the cone's axis of revolution.
up : bool
Whether to select the side of the cone that extends to infinity in the
positive direction of the coordinate axis (the positive half-space of
the ambiguity plane)
**kwargs
Keyword arguments passed to underlying plane classes
Attributes
----------
cone : openmc.YCone
Regular two-sided cone
plane : openmc.YPlane
Disambiguation surface
up : bool
Whether to select the side of the cone that extends to infinity in the
positive direction of the coordinate axis (the positive half-space of
the ambiguity plane)
"""
_surface_names = ('cone', 'plane')
def __init__(self, x0=0., y0=0., z0=0., r2=1., up=True, **kwargs):
check_greater_than('cone R^2', r2, 0.0)
self.cone = openmc.YCone(x0, y0, z0, r2, **kwargs)
self.plane = openmc.YPlane(y0)
self.up = up
__neg__ = XConeOneSided.__neg__
__pos__ = XConeOneSided.__pos__
[docs]class ZConeOneSided(CompositeSurface):
"""One-sided cone parallel the z-axis
A one-sided cone is composed of a normal cone surface and a "disambiguation"
surface that eliminates the ambiguity as to which region of space is
included. This class acts as a proper surface, meaning that unary `+` and
`-` operators applied to it will produce a half-space. The negative side is
defined to be the region inside of the cone.
.. versionadded:: 0.12
Parameters
----------
x0 : float, optional
x-coordinate of the apex. Defaults to 0.
y0 : float, optional
y-coordinate of the apex. Defaults to 0.
z0 : float, optional
z-coordinate of the apex. Defaults to 0.
r2 : float, optional
Parameter related to the aperture [:math:`\\rm cm^2`].
It can be interpreted as the increase in the radius squared per cm along
the cone's axis of revolution.
up : bool
Whether to select the side of the cone that extends to infinity in the
positive direction of the coordinate axis (the positive half-space of
the ambiguity plane)
**kwargs
Keyword arguments passed to underlying plane classes
Attributes
----------
cone : openmc.ZCone
Regular two-sided cone
plane : openmc.ZPlane
Disambiguation surface
up : bool
Whether to select the side of the cone that extends to infinity in the
positive direction of the coordinate axis (the positive half-space of
the ambiguity plane)
"""
_surface_names = ('cone', 'plane')
def __init__(self, x0=0., y0=0., z0=0., r2=1., up=True, **kwargs):
check_greater_than('cone R^2', r2, 0.0)
self.cone = openmc.ZCone(x0, y0, z0, r2, **kwargs)
self.plane = openmc.ZPlane(z0)
self.up = up
__neg__ = XConeOneSided.__neg__
__pos__ = XConeOneSided.__pos__
[docs]class Polygon(CompositeSurface):
"""Polygon formed from a path of closed points.
.. versionadded:: 0.13.3
Parameters
----------
points : np.ndarray
An Nx2 array of points defining the vertices of the polygon.
basis : {'rz', 'xy', 'yz', 'xz'}, optional
2D basis set for the polygon. The polygon is two dimensional and has
infinite extent in the third (unspecified) dimension. For example, the
'xy' basis produces a polygon with infinite extent in the +/- z
direction. For the 'rz' basis the phi extent is infinite, thus forming
an axisymmetric surface.
Attributes
----------
points : np.ndarray
An Nx2 array of points defining the vertices of the polygon.
basis : {'rz', 'xy', 'yz', 'xz'}
2D basis set for the polygon.
regions : list of openmc.Region
A list of :class:`openmc.Region` objects, one for each of the convex polygons
formed during the decomposition of the input polygon.
region : openmc.Union
The union of all the regions comprising the polygon.
"""
def __init__(self, points, basis='rz'):
check_value('basis', basis, ('xy', 'yz', 'xz', 'rz'))
self._basis = basis
# Create a constrained triangulation of the validated points.
# The constrained triangulation is set to the _tri attribute
self._constrain_triangulation(self._validate_points(points))
# Decompose the polygon into groups of simplices forming convex subsets
# and get the sets of (surface, operator) pairs defining the polygon
self._surfsets = self._decompose_polygon_into_convex_sets()
# Set surface names as required by CompositeSurface protocol
surfnames = []
i = 0
for surfset in self._surfsets:
for surf, op, on_boundary in surfset:
if on_boundary:
setattr(self, f'surface_{i}', surf)
surfnames.append(f'surface_{i}')
i += 1
self._surfnames = tuple(surfnames)
# Generate a list of regions whose union represents the polygon.
regions = []
for surfs_ops in self._surfsets:
regions.append([op(surf) for surf, op, _ in surfs_ops])
self._regions = [openmc.Intersection(regs) for regs in regions]
# Create the union of all the convex subsets
self._region = openmc.Union(self._regions)
def __neg__(self):
return self._region
@property
def _surface_names(self):
return self._surfnames
@CompositeSurface.boundary_type.setter
def boundary_type(self, boundary_type):
if boundary_type != 'transmission':
warnings.warn("Setting boundary_type to a value other than "
"'transmission' on Polygon composite surfaces can "
"result in unintended behavior. Please use the "
"regions property of the Polygon to generate "
"individual openmc.Cell objects to avoid unwanted "
"behavior.")
for name in self._surface_names:
getattr(self, name).boundary_type = boundary_type
@property
def points(self):
return self._tri.points
@property
def basis(self):
return self._basis
@property
def _normals(self):
"""Generate the outward normal unit vectors for the polygon."""
# Rotation matrix for 90 degree clockwise rotation (-90 degrees about z
# axis for an 'xy' basis).
rotation = np.array([[0., 1.], [-1., 0.]])
# Get the unit vectors that point from one point in the polygon to the
# next given that they are ordered counterclockwise and that the final
# point is connected to the first point
tangents = np.diff(self.points, axis=0, append=[self.points[0, :]])
tangents /= np.linalg.norm(tangents, axis=-1, keepdims=True)
# Rotate the tangent vectors clockwise by 90 degrees, which for a
# counter-clockwise ordered polygon will produce the outward normal
# vectors.
return rotation.dot(tangents.T).T
@property
def _equations(self):
normals = self._normals
equations = np.empty((normals.shape[0], 3))
equations[:, :2] = normals
equations[:, 2] = -np.sum(normals*self.points, axis=-1)
return equations
@property
def regions(self):
return self._regions
@property
def region(self):
return self._region
def _validate_points(self, points):
"""Ensure the closed path defined by points does not intersect and is
oriented counter-clockwise.
Parameters
----------
points : np.ndarray (Nx2)
An Nx2 array of coordinate pairs describing the vertices.
Returns
-------
ordered_points : the input points ordered counter-clockwise
"""
points = np.asarray(points, dtype=float)
check_iterable_type('points', points, float, min_depth=2, max_depth=2)
check_length('points', points[0, :], 2, 2)
# If the last point is the same as the first, remove it and make sure
# there are still at least 3 points for a valid polygon.
if np.allclose(points[0, :], points[-1, :]):
points = points[:-1, :]
check_length('points', points, 3)
if len(points) != len(np.unique(points, axis=0)):
raise ValueError('Duplicate points were detected in the Polygon input')
# Order the points counter-clockwise (necessary for offset method)
# Calculates twice the signed area of the polygon using the "Shoelace
# Formula" https://en.wikipedia.org/wiki/Shoelace_formula
# If signed area is positive the curve is oriented counter-clockwise.
# If the signed area is negative the curve is oriented clockwise.
xpts, ypts = points.T
if np.sum(ypts*(np.roll(xpts, 1) - np.roll(xpts, -1))) < 0:
points = points[::-1, :]
# Check if polygon is self-intersecting by comparing edges pairwise
n = len(points)
for i in range(n):
p0 = points[i, :]
p1 = points[(i + 1) % n, :]
for j in range(i + 1, n):
p2 = points[j, :]
p3 = points[(j + 1) % n, :]
# Compute orientation of p0 wrt p2->p3 line segment
cp0 = np.cross(p3-p0, p2-p0)
# Compute orientation of p1 wrt p2->p3 line segment
cp1 = np.cross(p3-p1, p2-p1)
# Compute orientation of p2 wrt p0->p1 line segment
cp2 = np.cross(p1-p2, p0-p2)
# Compute orientation of p3 wrt p0->p1 line segment
cp3 = np.cross(p1-p3, p0-p3)
# Group cross products in an array and find out how many are 0
cross_products = np.array([[cp0, cp1], [cp2, cp3]])
cps_near_zero = np.isclose(cross_products, 0).astype(int)
num_zeros = np.sum(cps_near_zero)
# Topologies of 2 finite line segments categorized by the number
# of zero-valued cross products:
#
# 0: No 3 points lie on the same line
# 1: 1 point lies on the same line defined by the other line
# segment, but is not coincident with either of the points
# 2: 2 points are coincident, but the line segments are not
# collinear which guarantees no intersection
# 3: not possible, except maybe floating point issues?
# 4: Both line segments are collinear, simply need to check if
# they overlap or not
# adapted from algorithm linked below and modified to only
# consider intersections on the interior of line segments as
# proper intersections: i.e. segments sharing end points do not
# count as intersections.
# https://www.geeksforgeeks.org/check-if-two-given-line-segments-intersect/
if num_zeros == 0:
# If the orientations of p0 and p1 have opposite signs
# and the orientations of p2 and p3 have opposite signs
# then there is an intersection.
if all(np.prod(cross_products, axis=-1) < 0):
raise ValueError('Polygon cannot be self-intersecting')
continue
elif num_zeros == 1:
# determine which line segment has 2 out of the 3 collinear
# points
idx = np.argwhere(np.sum(cps_near_zero, axis=-1) == 0)
if np.prod(cross_products[idx, :]) < 0:
raise ValueError('Polygon cannot be self-intersecting')
continue
elif num_zeros == 2:
continue
elif num_zeros == 3:
warnings.warn('Unclear if Polygon is self-intersecting')
continue
else:
# All 4 cross products are zero
# Determine number of unique points, x span and y span for
# both line segments
xmin1, xmax1 = min(p0[0], p1[0]), max(p0[0], p1[0])
ymin1, ymax1 = min(p0[1], p1[1]), max(p0[1], p1[1])
xmin2, xmax2 = min(p2[0], p3[0]), max(p2[0], p3[0])
ymin2, ymax2 = min(p2[1], p3[1]), max(p2[1], p3[1])
xlap = xmin1 < xmax2 and xmin2 < xmax1
ylap = ymin1 < ymax2 and ymin2 < ymax1
if xlap or ylap:
raise ValueError('Polygon cannot be self-intersecting')
continue
return points
def _constrain_triangulation(self, points, depth=0):
"""Generate a constrained triangulation by ensuring all edges of the
Polygon are contained within the simplices.
Parameters
----------
points : np.ndarray (Nx2)
An Nx2 array of coordinate pairs describing the vertices. These
points represent a planar straight line graph.
Returns
-------
None
"""
# Only attempt the triangulation up to 5 times.
if depth > 4:
raise RuntimeError('Could not create a valid triangulation after 5'
' attempts')
tri = Delaunay(points, qhull_options='QJ')
# Loop through the boundary edges of the polygon. If an edge is not
# included in the triangulation, break it into two line segments.
n = len(points)
new_pts = []
for i, j in zip(range(n), range(1, n + 1)):
# If both vertices of any edge are not found in any simplex, insert
# a new point between them.
if not any([i in s and j % n in s for s in tri.simplices]):
newpt = (points[i, :] + points[j % n, :]) / 2
new_pts.append((j, newpt))
# If all the edges are included in the triangulation set it, otherwise
# try again with additional points inserted on offending edges.
if not new_pts:
self._tri = tri
else:
for i, pt in new_pts[::-1]:
points = np.insert(points, i, pt, axis=0)
self._constrain_triangulation(points, depth=depth + 1)
def _group_simplices(self, neighbor_map, group=None):
"""Generate a convex grouping of simplices.
Parameters
----------
neighbor_map : dict
A map whose keys are simplex indices for simplices inside the polygon
and whose values are a list of simplex indices that neighbor this
simplex and are also inside the polygon.
group : list
A list of simplex indices that comprise the current convex group.
Returns
-------
group : list
The list of simplex indices that comprise the complete convex group.
"""
# If neighbor_map is empty there's nothing left to do
if not neighbor_map:
return group
# If group is empty, grab the next simplex in the dictionary and recurse
if group is None:
# Start with smallest neighbor lists
sidx = sorted(neighbor_map.items(), key=lambda item: len(item[1]))[0][0]
return self._group_simplices(neighbor_map, group=[sidx])
# Otherwise use the last simplex in the group
else:
sidx = group[-1]
# Remove current simplex from dictionary since it is in a group
neighbors = neighbor_map.pop(sidx, [])
# For each neighbor check if it is part of the same convex
# hull as the rest of the group. If yes, recurse. If no, continue on.
for n in neighbors:
if n in group or neighbor_map.get(n) is None:
continue
test_group = group + [n]
test_point_idx = np.unique(self._tri.simplices[test_group, :])
test_points = self.points[test_point_idx]
test_hull = ConvexHull(test_points, qhull_options='Qc')
pts_on_hull = len(test_hull.vertices) + len(test_hull.coplanar)
# If test_points are convex (including coplanar) keep adding to
# this group
if len(test_points) == pts_on_hull:
group = self._group_simplices(neighbor_map, group=test_group)
return group
def _get_convex_hull_surfs(self, qhull):
"""Generate a list of surfaces given by a set of linear equations
Parameters
----------
qhull : scipy.spatial.ConvexHull
A ConvexHull object representing the sub-region of the polygon.
Returns
-------
surfs_ops : list of (surface, operator) tuples
"""
basis = self.basis
boundary_eqns = self._equations
# Collect surface/operator pairs such that the intersection of the
# regions defined by these pairs is the inside of the polygon.
surfs_ops = []
# hull facet equation: dx*x + dy*y + c = 0
for dx, dy, c in qhull.equations:
# check if this facet is on the boundary of the polygon
facet_eq = np.array([dx, dy, c])
on_boundary = any([np.allclose(facet_eq, eq) for eq in boundary_eqns])
# Check if the facet is horizontal
if isclose(dx, 0, abs_tol=1e-8):
if basis in ('xz', 'yz', 'rz'):
surf = openmc.ZPlane(z0=-c/dy)
else:
surf = openmc.YPlane(y0=-c/dy)
# if (0, 1).(dx, dy) < 0 we want positive halfspace instead
op = operator.pos if dy < 0 else operator.neg
# Check if the facet is vertical
elif isclose(dy, 0, abs_tol=1e-8):
if basis in ('xy', 'xz'):
surf = openmc.XPlane(x0=-c/dx)
elif basis == 'yz':
surf = openmc.YPlane(y0=-c/dx)
else:
surf = openmc.ZCylinder(r=-c/dx)
# if (1, 0).(dx, dy) < 0 we want positive halfspace instead
op = operator.pos if dx < 0 else operator.neg
# Otherwise the facet is at an angle
else:
op = operator.neg
if basis == 'xy':
surf = openmc.Plane(a=dx, b=dy, d=-c)
elif basis == 'yz':
surf = openmc.Plane(b=dx, c=dy, d=-c)
elif basis == 'xz':
surf = openmc.Plane(a=dx, c=dy, d=-c)
else:
y0 = -c/dy
r2 = dy**2 / dx**2
# Check if the *slope* of the facet is positive. If dy/dx < 0
# then we want up to be True for the one-sided cones.
up = dy / dx < 0
surf = openmc.model.ZConeOneSided(z0=y0, r2=r2, up=up)
# if (1, -1).(dx, dy) < 0 for up cones we want positive halfspace
# if (1, 1).(dx, dy) < 0 for down cones we want positive halfspace
# otherwise we keep the negative halfspace operator
if (up and dx - dy < 0) or (not up and dx + dy < 0):
op = operator.pos
surfs_ops.append((surf, op, on_boundary))
return surfs_ops
def _decompose_polygon_into_convex_sets(self):
"""Decompose the Polygon into a set of convex polygons.
Returns
-------
surfsets : a list of lists of surface, operator pairs
"""
from matplotlib.path import Path
# Get centroids of all the simplices and determine if they are inside
# the polygon defined by input vertices or not.
centroids = np.mean(self.points[self._tri.simplices], axis=1)
in_polygon = Path(self.points).contains_points(centroids)
self._in_polygon = in_polygon
# Build a map with keys of simplex indices inside the polygon whose
# values are lists of that simplex's neighbors also inside the
# polygon
neighbor_map = {}
for i, nlist in enumerate(self._tri.neighbors):
if not in_polygon[i]:
continue
neighbor_map[i] = [n for n in nlist if in_polygon[n] and n >=0]
# Get the groups of simplices forming convex polygons whose union
# comprises the full input polygon. While there are still simplices
# left in the neighbor map, group them together into convex sets.
groups = []
while neighbor_map:
groups.append(self._group_simplices(neighbor_map))
self._groups = groups
# Generate lists of (surface, operator) pairs for each convex
# sub-region.
surfsets = []
for group in groups:
# Find all the unique points in the convex group of simplices,
# generate the convex hull and find the resulting surfaces and
# unary operators that represent this convex subset of the polygon.
idx = np.unique(self._tri.simplices[group, :])
qhull = ConvexHull(self.points[idx, :])
surf_ops = self._get_convex_hull_surfs(qhull)
surfsets.append(surf_ops)
return surfsets
[docs] def offset(self, distance):
"""Offset this polygon by a set distance
Parameters
----------
distance : float
The distance to offset the polygon by. Positive is outward
(expanding) and negative is inward (shrinking).
Returns
-------
offset_polygon : openmc.model.Polygon
"""
normals = np.insert(self._normals, 0, self._normals[-1, :], axis=0)
cos2theta = np.sum(normals[1:, :]*normals[:-1, :], axis=-1, keepdims=True)
costheta = np.cos(np.arccos(cos2theta) / 2)
nvec = (normals[1:, :] + normals[:-1, :])
unit_nvec = nvec / np.linalg.norm(nvec, axis=-1, keepdims=True)
disp_vec = distance / costheta * unit_nvec
return type(self)(self.points + disp_vec, basis=self.basis)
# Define function to create a plane on given axis
def _plane(axis, name, value, boundary_type='transmission', albedo=1.0):
cls = getattr(openmc, f'{axis.upper()}Plane')
return cls(value, name=f'{name} {axis}',
boundary_type=boundary_type, albedo=albedo)
[docs]class RectangularPrism(CompositeSurface):
"""Infinite rectangular prism bounded by four planar surfaces.
.. versionadded:: 0.14.0
Parameters
----------
width : float
Prism width in units of [cm]. The width is aligned with the x, x, or z
axes for prisms parallel to the x, y, or z axis, respectively.
height : float
Prism height in units of [cm]. The height is aligned with the x, y, or z
axes for prisms parallel to the x, y, or z axis, respectively.
axis : {'x', 'y', 'z'}
Axis with which the infinite length of the prism should be aligned.
origin : Iterable of two floats
Origin of the prism. The two floats correspond to (y,z), (x,z) or (x,y)
for prisms parallel to the x, y or z axis, respectively.
boundary_type : {'transmission, 'vacuum', 'reflective', 'periodic', 'white'}
Boundary condition that defines the behavior for particles hitting the
surfaces comprising the rectangular prism.
albedo : float, optional
Albedo of the prism's surfaces as a ratio of particle weight after
interaction with the surface to the initial weight. Values must be
positive. Only applicable if the boundary type is 'reflective',
'periodic', or 'white'.
corner_radius : float
Prism corner radius in units of [cm].
"""
_surface_names = ('min_x1', 'max_x1', 'min_x2', 'max_x2')
def __init__(
self,
width: float,
height: float,
axis: str = 'z',
origin: Sequence[float] = (0., 0.),
boundary_type: str = 'transmission',
albedo: float = 1.,
corner_radius: float = 0.
):
check_type('width', width, Real)
check_type('height', height, Real)
check_type('albedo', albedo, Real)
check_type('corner_radius', corner_radius, Real)
check_value('axis', axis, ('x', 'y', 'z'))
check_type('origin', origin, Iterable, Real)
if axis == 'x':
x1, x2 = 'y', 'z'
elif axis == 'y':
x1, x2 = 'x', 'z'
else:
x1, x2 = 'x', 'y'
# Get cylinder class corresponding to given axis
cyl = getattr(openmc, f'{axis.upper()}Cylinder')
# Create container for boundary arguments
bc_args = {'boundary_type': boundary_type, 'albedo': albedo}
# Create rectangular region
self.min_x1 = _plane(x1, 'minimum', -width/2 + origin[0], **bc_args)
self.max_x1 = _plane(x1, 'maximum', width/2 + origin[0], **bc_args)
self.min_x2 = _plane(x2, 'minimum', -height/2 + origin[1], **bc_args)
self.max_x2 = _plane(x2, 'maximum', height/2 + origin[1], **bc_args)
if boundary_type == 'periodic':
self.min_x1.periodic_surface = self.max_x1
self.min_x2.periodic_surface = self.max_x2
# Handle rounded corners if given
if corner_radius > 0.:
if boundary_type == 'periodic':
raise ValueError('Periodic boundary conditions not permitted when '
'rounded corners are used.')
args = {'r': corner_radius, 'boundary_type': boundary_type, 'albedo': albedo}
args[x1 + '0'] = origin[0] - width/2 + corner_radius
args[x2 + '0'] = origin[1] - height/2 + corner_radius
self.x1_min_x2_min = cyl(name=f'{x1} min {x2} min', **args)
args[x1 + '0'] = origin[0] - width/2 + corner_radius
args[x2 + '0'] = origin[1] + height/2 - corner_radius
self.x1_min_x2_max = cyl(name=f'{x1} min {x2} max', **args)
args[x1 + '0'] = origin[0] + width/2 - corner_radius
args[x2 + '0'] = origin[1] - height/2 + corner_radius
self.x1_max_x2_min = cyl(name=f'{x1} max {x2} min', **args)
args[x1 + '0'] = origin[0] + width/2 - corner_radius
args[x2 + '0'] = origin[1] + height/2 - corner_radius
self.x1_max_x2_max = cyl(name=f'{x1} max {x2} max', **args)
self.x1_min = _plane(x1, 'min', -width/2 + origin[0] + corner_radius,
**bc_args)
self.x1_max = _plane(x1, 'max', width/2 + origin[0] - corner_radius,
**bc_args)
self.x2_min = _plane(x2, 'min', -height/2 + origin[1] + corner_radius,
**bc_args)
self.x2_max = _plane(x2, 'max', height/2 + origin[1] - corner_radius,
**bc_args)
self._surface_names += (
'x1_min_x2_min', 'x1_min_x2_max', 'x1_max_x2_min',
'x1_max_x2_max', 'x1_min', 'x1_max', 'x2_min', 'x2_max'
)
def __neg__(self):
prism = +self.min_x1 & -self.max_x1 & +self.min_x2 & -self.max_x2
# Cut out corners if a corner radius was given
if hasattr(self, 'x1_min'):
corners = (
(+self.x1_min_x2_min & -self.x1_min & -self.x2_min) |
(+self.x1_min_x2_max & -self.x1_min & +self.x2_max) |
(+self.x1_max_x2_min & +self.x1_max & -self.x2_min) |
(+self.x1_max_x2_max & +self.x1_max & +self.x2_max)
)
prism &= ~corners
return prism
[docs]class HexagonalPrism(CompositeSurface):
"""Hexagonal prism comoposed of six planar surfaces
.. versionadded:: 0.14.0
Parameters
----------
edge_length : float
Length of a side of the hexagon in [cm]
orientation : {'x', 'y'}
An 'x' orientation means that two sides of the hexagon are parallel to
the x-axis and a 'y' orientation means that two sides of the hexagon are
parallel to the y-axis.
origin : Iterable of two floats
Origin of the prism.
boundary_type : {'transmission, 'vacuum', 'reflective', 'periodic', 'white'}
Boundary condition that defines the behavior for particles hitting the
surfaces comprising the hexagonal prism.
albedo : float, optional
Albedo of the prism's surfaces as a ratio of particle weight after
interaction with the surface to the initial weight. Values must be
positive. Only applicable if the boundary type is 'reflective',
'periodic', or 'white'.
corner_radius : float
Prism corner radius in units of [cm].
"""
_surface_names = ('plane_max', 'plane_min', 'upper_right', 'upper_left',
'lower_right', 'lower_left')
def __init__(
self,
edge_length: float = 1.,
orientation: str = 'y',
origin: Sequence[float] = (0., 0.),
boundary_type: str = 'transmission',
albedo: float = 1.,
corner_radius: float = 0.
):
check_type('edge_length', edge_length, Real)
check_type('albedo', albedo, Real)
check_type('corner_radius', corner_radius, Real)
check_value('orientation', orientation, ('x', 'y'))
check_type('origin', origin, Iterable, Real)
l = edge_length
x, y = origin
# Create container for boundary arguments
bc_args = {'boundary_type': boundary_type, 'albedo': albedo}
if orientation == 'y':
# Left and right planes
self.plane_max = openmc.XPlane(x + sqrt(3.)/2*l, **bc_args)
self.plane_min = openmc.XPlane(x - sqrt(3.)/2*l, **bc_args)
c = sqrt(3.)/3.
# y = -x/sqrt(3) + a
self.upper_right = openmc.Plane(a=c, b=1., d=l+x*c+y, **bc_args)
# y = x/sqrt(3) + a
self.upper_left = openmc.Plane(a=-c, b=1., d=l-x*c+y, **bc_args)
# y = x/sqrt(3) - a
self.lower_right = openmc.Plane(a=-c, b=1., d=-l-x*c+y, **bc_args)
# y = -x/sqrt(3) - a
self.lower_left = openmc.Plane(a=c, b=1., d=-l+x*c+y, **bc_args)
elif orientation == 'x':
self.plane_max = openmc.YPlane(y + sqrt(3.)/2*l, **bc_args)
self.plane_min = openmc.YPlane(y - sqrt(3.)/2*l, **bc_args)
c = sqrt(3.)
# Upper-right surface: y = -sqrt(3)*(x - a)
self.upper_right = openmc.Plane(a=c, b=1., d=c*l+x*c+y, **bc_args)
# Lower-right surface: y = sqrt(3)*(x + a)
self.lower_right = openmc.Plane(a=-c, b=1., d=-c*l-x*c+y, **bc_args)
# Lower-left surface: y = -sqrt(3)*(x + a)
self.lower_left = openmc.Plane(a=c, b=1., d=-c*l+x*c+y, **bc_args)
# Upper-left surface: y = sqrt(3)*(x + a)
self.upper_left = openmc.Plane(a=-c, b=1., d=c*l-x*c+y, **bc_args)
# Handle periodic boundary conditions
if boundary_type == 'periodic':
self.plane_min.periodic_surface = self.plane_max
self.upper_right.periodic_surface = self.lower_left
self.lower_right.periodic_surface = self.upper_left
# Handle rounded corners if given
if corner_radius > 0.:
if boundary_type == 'periodic':
raise ValueError('Periodic boundary conditions not permitted '
'when rounded corners are used.')
c = sqrt(3.)/2
t = l - corner_radius/c
# Cylinder with corner radius and boundary type pre-applied
cyl1 = partial(openmc.ZCylinder, r=corner_radius, **bc_args)
cyl2 = partial(openmc.ZCylinder, r=corner_radius/(2*c), **bc_args)
if orientation == 'x':
self.x_min_y_min_in = cyl1(name='x min y min in', x0=x-t/2, y0=y-c*t)
self.x_min_y_max_in = cyl1(name='x min y max in', x0=x+t/2, y0=y-c*t)
self.x_max_y_min_in = cyl1(name='x max y min in', x0=x-t/2, y0=y+c*t)
self.x_max_y_max_in = cyl1(name='x max y max in', x0=x+t/2, y0=y+c*t)
self.min_in = cyl1(name='x min in', x0=x-t, y0=y)
self.max_in = cyl1(name='x max in', x0=x+t, y0=y)
self.x_min_y_min_out = cyl2(name='x min y min out', x0=x-l/2, y0=y-c*l)
self.x_min_y_max_out = cyl2(name='x min y max out', x0=x+l/2, y0=y-c*l)
self.x_max_y_min_out = cyl2(name='x max y min out', x0=x-l/2, y0=y+c*l)
self.x_max_y_max_out = cyl2(name='x max y max out', x0=x+l/2, y0=y+c*l)
self.min_out = cyl2(name='x min out', x0=x-l, y0=y)
self.max_out = cyl2(name='x max out', x0=x+l, y0=y)
elif orientation == 'y':
self.x_min_y_min_in = cyl1(name='x min y min in', x0=x-c*t, y0=y-t/2)
self.x_min_y_max_in = cyl1(name='x min y max in', x0=x-c*t, y0=y+t/2)
self.x_max_y_min_in = cyl1(name='x max y min in', x0=x+c*t, y0=y-t/2)
self.x_max_y_max_in = cyl1(name='x max y max in', x0=x+c*t, y0=y+t/2)
self.min_in = cyl1(name='y min in', x0=x, y0=y-t)
self.max_in = cyl1(name='y max in', x0=x, y0=y+t)
self.x_min_y_min_out = cyl2(name='x min y min out', x0=x-c*l, y0=y-l/2)
self.x_min_y_max_out = cyl2(name='x min y max out', x0=x-c*l, y0=y+l/2)
self.x_max_y_min_out = cyl2(name='x max y min out', x0=x+c*l, y0=y-l/2)
self.x_max_y_max_out = cyl2(name='x max y max out', x0=x+c*l, y0=y+l/2)
self.min_out = cyl2(name='y min out', x0=x, y0=y-l)
self.max_out = cyl2(name='y max out', x0=x, y0=y+l)
# Add to tuple of surface names
for s in ('in', 'out'):
self._surface_names += (
f'x_min_y_min_{s}', f'x_min_y_max_{s}',
f'x_max_y_min_{s}', f'x_max_y_max_{s}',
f'min_{s}', f'max_{s}')
def __neg__(self) -> openmc.Region:
prism = (
-self.plane_max & +self.plane_min &
-self.upper_right & -self.upper_left &
+self.lower_right & +self.lower_left
)
# Cut out corners if a corner radius was given
if hasattr(self, 'min_in'):
corners = (
+self.x_min_y_min_in & -self.x_min_y_min_out |
+self.x_min_y_max_in & -self.x_min_y_max_out |
+self.x_max_y_min_in & -self.x_max_y_min_out |
+self.x_max_y_max_in & -self.x_max_y_max_out |
+self.min_in & -self.min_out |
+self.max_in & -self.max_out
)
prism &= ~corners
return prism